Cloned SSD won’t boot
Most of people know that the SSD (solid state drive) has better properties than traditional hard disk drive (HDD). Compared with HDD, SSD running more smooth with lower voice, and it is faster than HDD. Thus, a part of Windows users are trying to upgrade the old HDD to SSD for getting a better performance. In order to avoid reinstalling OS, they choose clone HDD to SSD. However, sooner they find the big problem that the cloned SSD won’t boot in Windows 10/8/7. It will showing a Windows Boot Manager with the message -
Windows fails to Start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then, click “Next”.
3. Click “Repair your computer”.
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Info:The Boot Configuration Data for your PC is missing or contains error.
Why cloned SSD won’t boot in Windows 10/8/7?
There are lot of reasons would cause the SSD won’t boot after clone. And here we concluded part of reasons:
1. If the source disk you cloned has bad sectors, it may cause cloned SSD won’t boot.
2. The system may be corrupted during cloning process.
3. Missed cloning the “system reserved” partition.
4. Set the wrong drive to boot from.
5. The drive letter may have changed while you change HDD to SSD. And this progress may cause boot files missing, which cause the cloned SSD won’t boot in Windows 10/8/7.
6. GPT/MBR conflict.
Solved: Windows 10/8/7 fails to boot after clone HDD to SSD
As for there are different reasons that caused cloned SSD won’t boot problem, here we provides you different ways to solve the problem.
Method 1. Setting BIOS to boot from UEFI or Legacy
If you cloned the GPT HDD to MBR SSD, or cloned the MBR HDD to GPT SSD, it is necessary to change boot mode from UEFI to Legacy or from Legacy to UEFI. The wrong boot mode will cause the SSD won’t boot after clone.
To change the boot mode, you can refer to the following to configure it:
1. Continuously press a specific key (usually F2, F8, F12,Del) to enter BIOS Setup.
2. Then, use the arrow keys to select Boot tab. Here, you can select UEFI/BIOS Boot Mode as Legacy or UEFI.
3. Press F10 to save the settings and then exit, restart your computer from the cloned SSD.
*If your computer only supports for Legacy boot mode, you can convert GPT to MBR, and then your disk can boot successfully in Legacy boot mode.
Method 2. Change boot order to boot from the cloned SSD
If there are more than one hard drive on your computer, when you boot failed, you need to consider whether it is wrong of your boot device. If it is, you need to get into BIOS and change the boot order to boot from the cloned SSD.
Method 3. Repair Windows Startup from Windows RE
Sometimes, you need to get into Windows recovery environment (Windows RE) to repair Windows Startup if the cloned SSD won’t boot in Windows 10. The Windows Startup repair will fix some errors and help you boot successfully.
Boot from the Windows installation disc. Select Repair your computer.
When you get into Advanced options, select Troubleshoot -> Advanced Options -> Automatic Repair (Windows 10/8). Then, it will start to repair the startup problem.
Method 4. Run Bootrec.exe
If Windows Startup Repair doesn’t work, you can use Bootrec.exe to fix cloned SSD won’t boot in Windows 10/8/7.
Boot computer from Windows installation disc. Select Troubleshoot -> Advanced Options -> Command Line. In the pop up command prompt, type the following commands to fix the Windows 10 fails to boot after clone HDD to SSD.
How to clone HDD to SSD without booting problems?
Is there any way that can help users clone HDD to SSD without booting problems? Yes, and it is highly recommend you to use the best free cloning software AOMEI Backupper Standard, which allows you to clone HDD to SSD with simple steps. And you can boot from the cloned SSD successfully. The AOMEI Backupper is suitable for Windows 10/8/7/Vista/XP.
If you are trying to clone GPT HDD to MBR SSD, you need to know that the partitions on the GPT HDD should be less than 4 partitions, otherwise, you need to convert MBR SSD to GPT in advanced.
If the GPT HDD is beyond 2 TB, you can’t clone it to MBR SSD.
If you are cloning system disk to a different partition style, the AOMEI Backupper will remind you whether you need to convert the target disk or not.
If your current operating system is 32-bit, you can’t clone to the GPT disk. Because the 32-bit system can’t boot from GPT disk.
AOMEI Backupper allows you to clone large HDD to smaller SSD as only as the destination disk is large enough to store data on the source disk.
Step by step clone:
Step 1. Connect the SSD to your computer and make sure it can be detected. Free download AOMEI Backupper, install and launch it. Click Clone -> Disk Clone.
Step 2. Select the HDD as the source disk.
Step 3. Select SSD as the destination disk.
Step 4. Here you will move to the final page. Check the box of “Align partition to optimize for SSD” Click Start Clone.
* If you only want to clone system, you can upgrade to AOMEI Backupper Professional to unlock the System Clone feature and more advanced features.
* If you are trying to clone disk from one computer to another, you can Use Dissimilar Hardware Restore. Backup HDD to SSD using AOMEI Backupper. Then create an AOMEI bootable media to boot the target computer and restore the backup to the destination SSD with Universal Restore option enabled.
* For Windows server users, the AOMEI Backupper Server is suitable.