The Issue: EZ Gig IV Clone Failed
"Plan to upgrade my laptop computer to SanDisk 500GB SSD to gain a new experience. Using EZ Gig IV to do the cloning because it says the cloning process can be completed in only three steps. Have not much experience on computer and do not want to reinstall everything I have now. However, the cloning process proceeds very slowly after I click the Start Clone button. Changed boot order already and followed this EZ Gig IV manual. When it finished, I cannot boot from the cloned SSD. Why and what should I do next?"
It is a post on EZ Gig IV clone not booting issue when he tried to clone old hard drive to new SSD. It would be frustrating when upgrading disk been paused due to cloning failure. Well, it is also important to figure out why would that happen and what should you do to deal with the problem.
Why Would EZ Gig IV Cloning Problems Happen and How to Fix?
There are many possible reasons that could lead to cloning failure with EZ Gig. In general, following reasons are common factors. Both causes and fixes will be introduced.
Using USB 3.0 host controller. Usually, to use EZ Gig, you may also need to use one of the Apricorn’s products including Drive Wire, EZ Upgrade, Velocity Solo, or SATA Wire. However, the SATA Wire will work properly only if it is in the USB 2.0 with USB 2.0 speeds. Therefore, please change the port and try again.
EZ Gig IV not recognizing drive. Check if it is detected in BIOS. If yes, then check Disk Management. If not, reconnect it and try again. Please note that if you connect Samsung SSD 850 EVO M.2 to your computer, please change SATA Mode Configuration to M.2 in BIOS.
EZ Gig IV stuck on copying bad sectors. When EZ Gig IV copies bad sectors, it may stick or just stop the cloning progress, which results in cloning failure directly. You may need to run CHKDSK to check hard drive for errors. Note that when the bad sectors be fixed (if it could be), all data on that sector would lose.
Other elements like using EZ Gig IV software crack and EZ Gig IV cannot find drive are likely to get into that trouble. Some sorts of trouble could be solved with those fixes, yet some could not. What’s worse, the EZ Gig IV Cloning Software with Data Select for Windows can support deselect files from given four folders only. That makes deselecting other programs or partitions impossible. Write errors and cloning in a very slow speed issues are also complained by users. As a result, turning to EZ Gig IV alternative is a wise option.
Solve EZ Gig IV Cloning Failed Error in another Way
If problems cannot be fixed by all mentioned means, it is time to choose a different cloning tool. AOMEI Backupper Professional is reliable cloning software that ensures secure boot. As an all-around cloning tool, it provides different features for different purposes. For example, one can move only OS drive to SSD with the feature System Clone. It will clone system drive and all boot related partitions in the process. UEFI boot cloning is available as well.
For hard drive upgrading totally, it is suggested to do disk cloning with its feature Disk Clone. All partitions and drives will be copied to the target drive. To clone large drive to smaller SSD, Intelligent Clone is recommended (by default). The option is to do Sector by Sector Clone, which, as its name implies, will clone every sector from the source to the destination.
Another helpful feature, Partition Clone, is mostly used to clone dynamic volume to basic disk. In addition, the software has lucid and user-friendly interface, and supports Windows 10, 8/8.1, 7, XP and Vista. Why don’t you have a try?
Clone Windows to SSD with Step-by-Step Guide
Note: selected SSD will be overwritten, so please back up important files beforehand, if any.
1. Connect the SSD to your computer and make sure it can be detected by Windows. Install, launch and register AOMEI Backupper Professional.
2. In the main console, click Clone and then System Clone.
3. The system drive and boot related partitions are selected by default. Now, please click to select the space on SSD as the destination.
4. Check the option Align partition to optimize for SSD to improve the reading and writing speed and prolong its lifespan. Click Start Clone to execute the task.
5. Grab a cup of coffee and wait for it to complete. The time takes any point from minutes to several hours, depending on how large your drive is. It is suggested to remove old hard drive, install SSD and then boot from the cloned SSD for the first time. You can also change boot order in BIOS, but the first method is recommended.
Sector by sector clone method requires the destination is equal or larger than the selected system drive in size.
Reconnect the old hard drive to your computer after making sure everything is correct. It can be used as secondary storage if you reformat the hard drive.
Several solutions for EZ Gig clone failed issue are discussed above. Choose the one that accord with your situation to fix. If the problems cannot be solved, then it is a good idea to use a different cloning utility. AOMEI Backupper Professional earns good reputation among its users, so give it a shot at least.
Other than cloning features, the software is also complete backup solution for all Windows computers. For example, you could perform system backup to external storage on a regular basis to protect your Windows continuously.