Guide for Bare Metal Recovery

Posted by @Cherry

April 25, 2017

Bare metal recovery is a kind of utility that can restore data to different hard drive or different computer. This article will guide you how to do bare metal recovery.

What is Bare Metal Recovery?

Bare metal recovery (BMR) is a solution that enables you to restore a PC or server that has suffered a catastrophic failure to an earlier state you backed up, including operating system, its settings, programs running on it and even all the data. The "bare metal" refers to a completely blank hard disk on the same or different machine. The BMR solution avoids reinstallation from scratch. As a result, it can minimize computer downtime and save a lot of administrative efforts. Generally speaking, BMR makes disaster recovery process easier, better, and faster.

The Scenarios You May Need to Perform a Bare Metal Restore

As it mentioned above, it can be divided many situations to result in bare metal restore.

1. The collapse of system or the failure of hard drive. You may meet system crash or hard drive failure, which caused by some software, such as the install or uninstall a program. It also caused by some unexpected operation of the system such as accidently delete files. If there are “Device error” or “Non-System disk or disk error, Replace strike any key when ready” on your screen, you should understand that there is something wrong with your hard drive.

2.System error. Obviously the Windows won’t boot up because of some reasons. The system had something wrong so that you have to perform a bare metal recovery.

3. Blue screen of death (BSoD). It is depressed that comes out blue screen when you working on your computer. Blue screen is an image to protect the data files when the Windows operation system cannot restore from a system error. Sometimes, you can reboot the system to solve this problem. But, to ensure it won’t happen again, check up is necessary.

4.Software upgrade disaster. You may think that software upgrade is a good thing for the whole system. There is a misunderstanding of it. Software upgrade may exist incompatible question, or it may company some plug-in so that the good thing becomes a disaster.

5.Virus invasion. Computer virus can broke up the features of computer or destroy the data easily. It can make the system crash and can’t load finally.

Besides, there are many scenarios that you should do a bare metal recovery. For example, your laptop was lost or stolen, you make a server hardware refresh, or migrate from physical to virtual servers, bought a new personal computer or laptop, migration from HDD to SSD and so on. For some of them can recovery to same machine while others can only restore to dissimilar hardware.

Restore a Backup Image to Bare Metal Machine

To solve the problems as mentioned above, you should restore a backup image with the help of a backup software like AOMEI Backupper to bare metal machine. It’s very easy and convenient for image backup. You only need to select a partition, a drive or others within AOMEI Backupper. It will spend a little time to finish the task. If you backed up the disk of the PC or server, you would never worry about the system crash, or loss your data after losing laptop. Even when you got a new machine, you can restore the backup image to the bare metal machine.

Windows P2V Bare Metal Restore

Besides restore a backup image to bare metal machine, you can also restore it from physical to virtual machines. Here, I will show you the steps of how to perform a physical to virtual (P2V) bare metal recovery to Windows with the help of AOMEI Backupper.

Tips:

Before you do, please make sure that you have prepared a system image backup and know where it is saved.

Step1. Backup an image of the physical server using AOMEI Backupper.

Step2. First, launch AOMEI Backupper Professional and select the “Create Bootable Media” blow “Utilities”. If you have multiple computers, you can use the “AOMEI PXE Boot Tool”. As you can’t boot a new PC, you should create a bootable media before start the VM.

Step3. Use the bootable media you have created to open a new virtual machine without installing any operation system on the virtual environment and make sure it has more space than the physical machine.

Step4. Start the VM with the boot disk created in step2. After start up you can see AOMEI Backupper under Windows PE. Click “Restore” as the following picture and you can browse the path to select the system image you created.

Browse System Backup Image

In the step2, the system image has been stored on shared network folder, so, click the “Share/NAS” and input the information to find the image.

Share NAS

Step5.Select a backup time point to restore. Click “Next”.

Restore System Image

Step6.Select a destination for the bare metal recovery and click “Next” to go on.

Select Disk

Step7.Following the prompts to choose the drives you will be recovering and select the location of the restore as the new VM, click the “Start Restore”.

Universal Restore

Step8.After those operations, the software will restore your image backup automatically. Click the finish, and you have already finished bare metal restore& recovery.

Click Finish

To sum up, no matter you want to recover the bare metal to the same hard drive or dissimilar drives, the steps won’t change a lot, and I hope this passage could help you to perform bare metal recovery. Also, you can download the free edition of AOMEI Backupper.