Error Loading Operating System in Windows 7 – How to Fix It Easily

You will learn 5 solutions to “Error Loading Operating System” issue and how to prevent data loss from it again. Get them in the following now!

Ivy

by Ivy Updated on October 20, 2022

Share this: instagram reddit

What causes "Error Loading Operating System" in Windows 7?

The error message “Error Loading Operating System” with a black screen often appears while starting your computer, owing to a fresh installation of Windows operating system, sudden power failure, system crash, system restart, viruses attack, disk not properly partitioned.

Error Loading Operating System

As normal, when you boot your computer, the BIOS and CMOS will check the operating system and hardware and then boot your computer. But if there is any issue, your computer will fail to boot. Below are the common reasons for it:

  • The system BIOS does not support the hard drive. You need to update BIOS from the manufacturer’s website.

  • The hard drive is not properly set up in CMOS.

  • The computer has wrong MBR information. You are supposed to restore the MBR information of the disk.

  • The system file is damaged.

  • The system partition is damaged due to sudden power cuts, virus infection.

  • The disk is corrupted completely. You need a new one.

  • The disk containing operating system cannot be detected owing to multiple disks connected.

How to fix error loading operating system in Windows 7 (5 solutions)

After you receive error loading operating system in Windows 7, you cannot enter your computer. In this case, you can create a system repair disc or just use the installation disk provided by the manufacturer. You may use it in the following.

All solutions below are applied to error loading operating system on Dell/ASUS/HP/Acer/Lenovo, thus you can refer to the following way and see if it works.

Solution 1: Update BIOS of your computer

Step 1. Check out the motherboard in the user manual of your mainboard.

Step 2. Identify the current BIOS version from System Information.

Step 3. Download the latest BIOS update via laptop manufacturer's website.

Step 4. Run the BIOS update and restart your computer to apply the change.

Step 5. Go to CMOS setup and make sure the disk is detected. Then, change the Access mode to Large or MBA. It supports for large capacity of hard drive.

Solution 2: Restore MBR information of the disk

Wrong MBR information can be a cause of this error. You can use bootrec.exe to restore it to the correct state.

The first thing is to get command prompt window. You can use insert Windows installation disc into your computer and restart your computer from it, then click Repair your computer > Troubleshoot > Advanced Options > Command Prompt in order.

Repair Your Computer

Step 1. After command prompt windows loading, type the following commands and hit Enter.

  • bootrec /FixMbr

  • bootrec /FixBoot

  • bootrec /ScanOs

  • bootrec /RebuildBcd

Restore the MBR Information of Disk

Step 2. Remove installation disc first, and then type exit and press Enter.

Step 3. Restart your computer. If your computer boot as normal, no further steps are needed.

Solution 3: Use CHKDSK command prompt

The CHKDSK command can fix the corrupted system files on your computer. If there are any system files damaged, you can use follow the steps below: 

Step 1. Get to the command prompt window.

Step 2. Type chkdsk C: /r and hit Enter to run the pending operation. If this partition is in use, you will be asked to run this operation in the next system restart. Type Y and press Enter.

CHKDSK R

Step 3. Restart your computer and it will run disk check during the process. 

Solution 4: Use Startup Repair tool

Startup repair can fix many startup problems. If the problems still exist, you should try startup repair using installation disc.

Step 1. Insert Windows installation disc into your computer.

Step 2. Restart your computer from this disc and click Repair your computer > Troubleshoot > Advanced Options > Startup Repair.

Startup Repair Advanced Options

Step 3. Just wait and restart your computer after the operation finish.

Solution 5: Write zeros to hard drive with Format tool

If there is no effective way that can solve the "Error loading operating system" problem, you can try to write zeros to hard drive with Format command line. In simple words, you need to format the disk.

Step 1. Go to command prompt windows.

Step 2. Type format F: /fs:ntfs /p:1 and hit enter to format this partition and write zero to every sector of disk. If it asks you to enter volume label, type the label and hit enter.

Step 3. Click Y to confirm that you want to format this partition. Restart your computer after the process ends.

Write Zeros to Hard Drive

How to prevent data loss from ”Error loading operating system" again

As mentioned earlier, the "Error loading operating system" issue may be caused by different reasons, and there is a high risk of data loss. Much worse, if the disk is corrupted completely, you need to reinstall Windows and everything on it.

Thus, it's suggested to create a system image with a reliable backup software - AOMEI Backupper Standard. It will include the operating system, system files, drivers, installed programs, stored data, etc. Even if your system crashes, you will restore system image to new hard drive or SSD and then use it to replace the bad disk. And you can benefit from the following advantages of it:

All-in-one backup solutions: Except for system backup, you still can use it to backup disk, partition or individual files.
Backup system automatically: It supports daily, weekly, monthly schedule backup and you can set the backup frequency according your habits.
Greatly save disk space: You can use Normal or High compression level, Intelligent Sector Backup, Incremental Backup, etc.&
Multiple system support: You can use it on Windows 11/10/8/7/XP/Vista.

And it's very easy to use, even for beginner, thanks to its clear interface. All the process only require 3 steps. First, please download this software and install it on your computer. Second, prepare an external devices, such as , USB drive, if you want to backup system to USB flash drive.

Download Freeware Win 11/10/8.1/8/7/XP
Secure Download

Step 1. Launch this software, click Backup and System Backup subsequently. 

System Backup

Step 2. Modify Task Name and click where the arrow point to select a location for your backup.

Select Destination

Step 3. Set up backup settings in the Backup Options, Schedule and Scheme if you want to make this task simple and effecient. Then, click Start Backup to backup system in Windows 7.

General

Notes:✎...
For Backup Options, there are two important features, including Compression and Encryption (Paid). Compression can save your disk space. Encryption can ensure the security of your backup.
For Backup Schedule, you can set backup frequency from daily to weekly. Also, you can use Event-trigger or USB plug in the professional version.
USB plug in is very useful when you want to backup computer to USB flash drive. It will automatically backup system to USB when it's plugged in your computer.
For Backup scheme, you can use differential backup (Paid) or incremental backup to backup only changed files. And you can use By quantity, By time or By daily/weekly/monthly to delete old backups regularly and ensure there is alway enough space fore new backups.

Summary

You can easily fix the "Error loading operating system" issue with 5 given solutions. To avoid data loss due to it or other startup issues, it's suggested to create a system image with free backup software - AOMEI Backupper Standard, preferably schedule it to keep changes since previous backup or last full backup. And if you use the advanced version, you can delete old backup images with Backup Scheme to free up disk space for new backup.

Ivy
Ivy · Editor
Ivy is an editor of AOMEI Technology, she covers backup & restore,hard disk & partitions management and cloud files transfer and so on for AOMEI. She is an outgoing girl and enjoys helping people find solutions to their problems. She loves traveling, eating, reading and so on. She usually hangs out with friends at her leisure time.