Sector-by-sector clone or not?
Most advanced cloning software includes an option called “sector by sector clone”. However, there are a number of users who are confused about this option and don’t know whether to use sector-by-sector clone or not. Understanding what sector-by-sector clone is can help you make the decision.
Sector-by-sector clone, also known as bit-by-bit copy, means to clone all the sectors on a hard drive, even if the sector is blank or it is a logically bad sector. Thus, the cloned drive will keep exactly the same as the source drive. You may need sector-by-sector clone in following occasions:
Switch HDD to SSD without reinstalling the operating system and all your applications, especially when the target and source drives are equal in size.
Prepare a cloned drive for replacement in case that your main drive crashes all of a sudden.
Nevertheless, you may not use sector-by-sector clone if:
The destination drive is smaller than the source drive, or the cloning process will fail.
There are bad sectors detected on the source drive. Otherwise, the bad sectors will be brought to the destination drive as well.
Now you know whether to use sector-by-sector clone or not. What you need is reliable bit copy software to help you.
Best sector-by-sector clone software
If you are looking for sector-by-sector clone for free, AOMEI Backupper Standard can meet your demands. It’s the best sector-by-sector clone software which supports all Windows PC operating systems like Windows 10/8.1/8/7/Vista/XP.
It offers you the features of Disk Clone and Partition Clone. You can choose one according to your situation. It uses intelligent sector clone by default, which can assist you cloning hard drive with bad sectors. It also enables you to clone SSD to larger SSD and make full use of the extra space at the same time.
What’s more, the cloning process will run in the background, so you can continue your work on the computer during the process. Then, how to use AOMEI Backupper for sector-by-sector clone on SSD/HDD? Please move on to the next part.
How to perform sector-by-sector clone in Windows 10/8/7?
Before we start, you must backup files on the destination drive, because all the data in the destination will be deleted in the cloning process. I’ll show you how to perform sector-by-sector clone in Windows 10 as follows:
Step 1. Download AOMEI Backupper and follow the wizard to finish installation. It will be installed in a short time.
Step 2. Launch AOMEI Backupper. Click “Clone” on the left pane and select the clone type. Take “Disk Clone” as an example.
Step 3. Select the source disk that you want to clone and click “Next”.
Step 4. Select the destination disk to store the cloned data and click “Next”.
Step 5. Tick “Sector by sector clone”. Confirm the operation and click “Start Clone”.
If the destination disk is an SSD, you can tick “Align partition to optimize for SSD” in Step 5 to improve the reading and writing speed of the SSD.
If the source disk is the system disk, you need to change boot order in BIOS or replace the source drive with the cloned one to boot from it after cloning.
Whether to choose sector-by-sector clone or not? This article have given you a clear guide. In addition to cloning hard drives sector by sector, you can also enjoy the backup & recovery feature brought by AOMEI Backupper. After you figure out what to backup before reinstalling Windows 10, you can use it to finish the backup task. It also enables you to make Windows 10 manage backups automatically. Don’t hesitate to give it a try!