About M.2 NVMe SSD
M.2, formerly known as the Next Generation Form Factor (NGFF), is a specification for internally mounted computer expansion cards and associated connectors. It replaces the mSATA standard. With more flexible physical specification, M.2 is more suitable than mSATA for the use of SSD in small devices such as ultrabooks or tablets.
NVMe (non-volatile memory express) is an open logical device interface specification for accessing non-volatile storage media attached via a PCIe (Peripheral Component Interconnect Express) bus. The major benefits of NVMe-based PCIe SSDs over SAS-based and SATA-based SSDs are reduced latency in the host software stack and higher input/output operations per second.
In a word, an M.2 NVMe SSD is an SSD with smaller, more flexible form factor and higher performance.
Why do you need M.2 NVMe SSD duplicator?
If you use an M.2 NVMe SSD as main drive, you should clone it for regular backup. When your current M.2 NVMe SSD is running out of space, you can upgrade it to a larger one using NVMe cloning software. What’s more, you can go back to your work almost immediately with an M.2 NVMe SSD duplicate in case of a sudden malfunction.
Since it’s important to clone M.2 NVMe SSD, what comes first is to choose a reliable M.2 SSD cloner.
Find the best M.2 NVMe SSD duplicator for Windows
With the right M.2 NVMe SSD duplicator, you will save much time and efforts. Here I’d like to recommend AOMEI Backupper Standard to you. It is your total solutions for backup, sync, recovery and clone and it is free of charge! I’ll show you how to clone NVMe SSD in two different situations separately:
Situation 1: There are more than one M.2 slots in your computer.
In this situation, you can easily clone M.2 NVMe SSD to another SSD in following steps:
Step 1. Connect the target SSD to your computer and make sure it is detected. Download, install and run AOMEI Backupper. Click “Clone” on the left pane and select “Disk Clone”.
Step 2. Select the M.2 NVMe SSD as source disk and click “Next”.
Step 3. Select the destination SSD you have connected to your computer and click “Next”.
Step 4. Tick “Align partition to optimize for SSD”. Confirm the operation and click “Start Clone”.
The destination disk will be completely overwritten. Backup the destination disk before you start clone if there are important data on it.
Situation 2: There is only one M.2 slot in your computer.
Under this circumstance, you will need an M.2 to SATA or M.2 to PCIe adapter to connect the second drive, and then follow the same steps above. If you don’t have such adapter, you can try the backup & restore method. Learn detailed steps below:
1. Connect a USB drive to your computer. Create bootable media with AOMEI Backupper.
2. Click “Backup” on the left pane and select “Disk Backup” to backup M.2 NVMe SSD on the bootable USB. Follow the wizard to complete the process.
3. Replace the current M.2 NVMe SSD with the new NVMe SSD. Boot your computer from the bootable USB you just created.
4. You’ll see loaded AOMEI Backupper once login. Click “Restore”, select the disk backup task to restore and click “Next”.
5. Select a backup point and click “Next”.
6. View the image information, select the whole disk to restore and click “Next”.
7. Select the new NVMe SSD as destination disk and click “Next”.
8. Tick “Align partition to optimize for SSD”. Confirm the operation and click “Start Restore”.
When you are looking for M.2 NVMe SSD duplicator, AOMEI Backupper can be your best choice. It provides you with two ways to duplicate M.2 NVMe SSD to another SSD. Apart from cloning M.2 NVMe SSD, AOMEI Backupper offers a quick workaround to HP recovery media creation in Windows 10 and works as an alternative when WD Sync not working.