Cloned hard drive to SSD but black screen when booted
“Recently, I purchased an SSD and try to replace my old HDD with it. I just cloned my OS drive to the SSD. However, when I tried to boot it from the SSD, all there is a black screen with a cursor that is constantly loading. The most frustrating thing is that I am unable to get into bios or troubleshoot through windows unless I unplug the SSD completely to force it to boot through the old drive, which boots and functions perfectly fine. Any idea on how to get it up and running?”
Black screen after cloning disk fixed
When you meet the problem that black screen after cloning disk, you can try to follow the steps below:
Step 1. Connect the new hard drive to the inside of your computer as the boot disk. And connect your original hard drive to your computer as an external hard drive.
Step 2. Turn on your computer to see whether it can boot from the cloned hard drive. If you still stuck on black screen, hit Ctrl + Shift + Esc
File > run explorer
If this doesn’t change anything, hit Ctrl + Shift + Esc again
File > Run explorer
This should open My Computer/This PC
Step 3. Go to your desktop through the explorer, then, right click My Computer/This PC -> Manage -> Storage -> Disk Management.
Step 4. Here you need to check the drive configuration. If it’s another drive with system under and there is another drive with drive letter C, you need to right click the C drive, and select Change drive letter and path.
Step 5. After change that, you can shutdown the computer. Pull out the old hard drive, restart the computer and it may work normally.
* If your computer still shows black screen, you can reconnect the old hard drive and change the registry value.
1. Open regedit. Go to this location HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices and look for \DosDevices\C:
2. Modify this hey to any random letter for example \DosDevices\C: to \DosDevices\O:\
3. Then, shutdown your computer, remove the old hard drive and start your computer from the cloned disk successfully.
* If your cloned hard drive still fails to boot correctly, then you need to consider to reclone the hard drive.
Clone disk with the free disk cloning software - AOMEI Backupper
AOMEI Backupper Standard should be the best free disk cloning software that can help you clone disk without the problem of black screen after cloning disk. And here are the detailed steps below.
Before cloning, you need to know:
AOMEI Backupper only allows you to clone MBR disk (less than 4 partitions on) to GPT disk. If there are more than 4 partitions on the MBR disk, you need to convert MBR to GPT disk in advanced.
Windows 32 bit doesn’t work on a GPT disk. If your Windows is 32 bit and the destination disk is GPT disk, please convert GPT disk to MBR disk before cloning.
If you are planning to change the system disk from MBR to GPT, make sure your computer’s motherboard supports EFI/UEFI. Otherwise, the system won’t boot successfully.
After knowing those tips, you can start to clone disk with AOMEI Backupper.
Step 1. Connect the new HDD/SSD to your computer. Free download AOMEI Backupper Standard. Then, choose Clone -> Disk Clone.
Step 2. Select your old hard disk as the source disk.
Step 3. Select the new HDD/SSD as the destination disk.
Step 4. When you move to the final window, you need to confirm the whole operation, and then click the Start Clone to execute the operation.
AOMEI Backupper allows you to edit partitions on the destination disk during the cloning if you upgrade to its Professional edition.
Sector-by-sector clone requires the cloned disk is larger than the source disk.
If the cloned disk is SSD, you can check the option “Align partition to optimize for SSD”, which will optimize the performance of the SSD.
With the help of AOMEI Backupper, you won’t stuck on black screen after cloning SSD/HDD anymore. Shut down the computer, remove the old hard drive, and then, start your PC with the cloned disk, It would be worked.
AOMEI Backupper should be the best disk cloning software. With it, you won’t meet the problem black screen after cloning disk. If you only want to clone the system and boot files from the old hard drive to the new disk, AOMEI Backupper Professional enables you to clone system only. Besides, AOMEI Backupper is a great backup and restore software that can help you restore system image to new SSD or HDD. If you are bothered by the black screen after disk cloning from HDD to SSD/HDD, you can try to use AOMEI Backupper to transfer Windows OS to dissimilar hardware.
By the way, AOMEI Backupper Standard and AOMEI Backupper Professional is designed for Windows PC users. If your PC installed Windows 10/8/7/Vista/XP, you can use any one according to your needs. But if you are using Windows Server 2003, 2008, 2012, 2016, AOMEI Backupper Server is suitable for you.