Backup Settings

Posted by @AOMEI

August 20, 2018

When you create a backup task in AOMEI Centralized Backupper, you can add some advanced settings for the backup task, such as setting up a scheduled backup, enabling backup encryption, mail notification, and so on

You can find the global settings under the menu button in the top right corner of the program, also when creating a new task of the given computers, you can set up a task setting by clicking Settings button.

settings.png

Compression

Compression.png

 The Normal level is selected by default and is recommended, but you may also select Higher or None. See more details as follows:

· None: Data will be imaged without any compression, so the image file size will be equal to your original data.

· Normal: Data will be compressed to a moderate level. It is a recommended compression level.

· High: A much higher compression level is used during the backup. The image file will be smaller than other levels but the backup will takelonger time to complete.

Note that some types of file are already compressed, such as .jpg, .pdf or .mp3. If your backup contains a lot of such files, then the generated image file might not obviously be compressed even when High level is selected.

Splitting

splitting.png

Image files can be split into several smaller files to fit into different smaller storage media. The program supports automatically splitting one image file into several parts during the backup process.

· Automatic: The split size depends on the file system of the destination storage medium.

· Customized size: Input a proper value and the image will be split into this size. Note that the minimum file size is 50MB.

Intelligent Sector

Intelligent_sector.png

AOMEI Centralized Backupper allows you to select different backup modes for System/Disk/partition backup.

· Intelligent Sector Backup: Only backs up the used sectors(blocks)of file systems. This will reduce the size of the image file and backup time.

· Make an Exact Backup(a.k.a Sector by Sector Backup): This option will back up all sectors(blocks) of the disks or partitions whether they are in use or not.

VSS

VSS.png

VSS is short for Volume Shadow Copy Service. This technology allows you to continue working while the backup is in progress. If you don’t use VSS, the program will automatically use the built-in technique instead oflivebackup. Choose one of the modes to begin your backup task.

Note: There are several paths and file type are excluded by Microsoft VSS, like Windows Upgrade list and Outlook *.OST file, you can select “Don’t use VSS” to include them in the backup file.

You can find the exclusion list under registry(regedit) path: Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToSnapshot

Notifications

Notifications.png

In unattended operations, you may wish to be informed about the results of backup plans. This function can be used to send a report of the execution result to an email address you provide. There are two emails servers available for sending the email notification: Hotmail server and Gmail server.

Enter your Hotmail or Gmail account and password as notification sender and then type an email address as the notification receiver.

Note: You need to enable email notification when you create backup task under Settings-->General.

Simultaneous PCs

simultaneous_pcs.png

Generally, if there are too many clients (such as, 10 or 20 computers) backing up to same NAS or Network share storage simultaneously, it will slow down the overall speed of writing to NAS, you can restrict the numbers of clients that can be backed up at the same time based on the LAN bandwidth and the storage server's capacity. Eg: set the number to 3, so, there only are 3 computers backing up data to target drive at the same time.

IP Segments

ip_segment.png

If there are clients from different subnet.for example, AOMEI Centralized Backupper is connected to network 192.168.1.1, and you want to manage clients under192.168.4.1, you can enter 192.168.4 in the textbox below Enable IP Segments Management checkbox to allow AOMEI Centralized Backupper control those clients. 

Notes:

You need to add IP segments one by one to the box.

You can input IP segments in batch via importing a text file. Please create a text file and input IP segments to text: each line with one IP segment.

Other

other.png

Directly exit the program when closing the main window.

Hide the tray icon while the client computers start performing the backup task.

Tips:

For specific task settings, there are other options available:

· Comments:You can make comments for the current task so that you can find it easily

· Encryption: You can encrypt your backup image for this current task so that others can not access the data within.

task_setting_general.png